Unit 2, Dale Street,
Bilston,
Wolverhampton,
WV14 7JY

Tel: 01902 408686
Fax: 01902 497834

Click here to view map

PVC Lining

We have been using PVC Lining for many years where a combination of chemical resistance and flexibility is required. This lining is bonded to metal and will expand and contract at a very similar rate to the metal therefore maintaining good adhesion properties over a wide temperature range.

All items to be lined are inspected as to their suitability for tank lining, shot blasted to Swedish Standard SA2.5, de-dusted and primed with a suitable rubber primer immediately after blasting. The PVC is then cut to size and bonded to the steel using a high quality contact adhesive after being pre-shrunk. It is then welded by a highly skilled plastic welder and a high voltage spark test carried out. Once bonded to the steel it will expand and contract at a very similar rate as the steel ensuring excellent adhesion at both upper and lower ends of the temperature range. The most common use of PVC lining is in chrome tank lining, where its resistance is better than that of rubber. West Midlands Rubber & Plastic Co Ltd specialise in the manufacture and the lining of various types of rubber to BS6374. We also carry out rubber lining at customer's sites.

In addition we also manufacture compensators for ducting and line tanks with PVC Lining. For further details, please call today on 01902 408686.

This article has been produced to provide general information and is not the opinion of the website owner/ company and has no relation to products and services provided by the company. For more information please contact us.